Design and fabrication of 40 Gbit/s error-free high-speed 850 nm VCSEL using NRZ modulation
Author:
Affiliation:

1.State Key Laboratory of High Power Semiconductor Laser, Changchun University of Science and Technology, Changchun 130022, China;2.State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics Chinese Academy of Sciences, Changchun 130033, China;3.Jlight Semiconductor Technology Co., Ltd, Changchun 130033, China

Clc Number:

TN248.4

Fund Project:

National key research and development program of China (2018YFB2201000); K.C.Wong Education Foundation (GJTD-2020-10)

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    850 nm vertical cavity surface-emitting lasers are the core light source of the short-range optical interconnect. With the increasing demands for data center traffic, achieving NRZ modulated high speed error-free transmission is a hot current research topic. This paper designed and fabricated a high-speed 850 nm vertical cavity surface-emitting laser with six oxide limiting layers in a λ/2 short cavity. At room temperature, the -3 dB bandwidth was up to 23.8 GHz. Clear eye diagrams were obtained under the test conditions of 50 Gbit/s (1 m) and 40 Gbit/s (100 m). Transmission tests showed that error-free transmission was achieved at transmission distances of 1 m and 100 m with transmission rates of 40 Gbit/s and 30 Gbit/s, respectively, by NRZ modulation without the use of pre-emphasis, equalization, and forward error correction.

    Reference
    Related
    Cited by
Get Citation

TONG Hai-Xia, WANG Yan-Jing, JIANG Ning, TIAN Si-Cong, TONG Cun-Zhu, WEI Zhi-Peng, WANG Li-Jun. Design and fabrication of 40 Gbit/s error-free high-speed 850 nm VCSEL using NRZ modulation[J]. Journal of Infrared and Millimeter Waves,2023,42(4):457~461

Copy
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:September 29,2022
  • Revised:June 05,2023
  • Adopted:March 13,2023
  • Online: June 02,2023
  • Published: