(英)光电成像系统的协同设计方法研究
投稿时间:2019-03-26  修订日期:2019-11-22  点此下载全文
引用本文:于清华,肖锡晟,陈凡胜,孙胜利.(英)光电成像系统的协同设计方法研究[J].红外与毫米波学报,2019,38(6):728~732].YU Qing-Hua,XIAO Xi-Sheng,CHEN Fan-Sheng,SUN Sheng-Li.Co-design method for electro-optical imaging systems[J].J.Infrared Millim.Waves,2019,38(6):728~732.]
摘要点击次数: 304
全文下载次数: 239
作者单位E-mail
于清华 中国科学院上海技术物理研究所 红外智能感知重点实验室上海 200083 yuqinghua2000@126.com 
肖锡晟 中国科学院上海技术物理研究所 红外智能感知重点实验室上海 200083
中国科学院大学北京
100049 
 
陈凡胜 中国科学院上海技术物理研究所 红外智能感知重点实验室上海 200083  
孙胜利 中国科学院上海技术物理研究所 红外智能感知重点实验室上海 200083  
中文摘要:在传统的光电成像系统设计中,光学子系统和电子学子系统是分开设计的.这导致两个子系统的参数化之间协调程度降低,导致子系统兼容性不完善.为了提高各子系统之间的兼容性,缩短设计时间,减少开发成本,本文提出了一种协同设计方法.在端到端光电性能评价的基础上,采用多目标多参数优化算法对光电成像系统的配置参数进行优化.利用该方法对空间红外成像系统配置参数进行了优化,且获得良好在轨成像效果.结果表明,该方法对优化光电成像系统的参数配置,评价光电成像系统的性能具有积极的作用.
中文关键词:成像系统  协同设计方法  端到端评价,杂散光
 
Co-design method for electro-optical imaging systems
Abstract:In the traditional design of electro-optical imaging systems, the optical and electronic subsystems are designed separately. This leads to a reduction in the level of coordination between the parameterization of the both subsystems, resulting in imperfect subsystem compatibility. In order to improve the compatibility between subsystems, shorten a design time and reduce the developments, we propose a co-design method. Based on the end-to-end optoelectronic performance evaluation, the multi-objective and multi-parameter optimization algorithm is used to optimize the configuration parameters of the optoelectronic subsystem. A space infrared imaging system was optimized by this method and imaged good pictures in orbit. The results show that the method has a positive role in optimizing the configuration parameters of the electro-optical imaging system and evaluating the performance of the electro-optical imaging system.
keywords:imaging systems  co-design method  end-to-end evaluation  stray light.
查看全文  HTML  查看/发表评论  下载PDF阅读器

版权所有:《红外与毫米波学报》编辑部