DC磁控溅射制备的TiNx薄膜组分及性能分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目


Composition and properties of TiNx thin films prepared by DC magnetron sputtering
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用DC磁控溅射法在p-Si(111)衬底上制备了TiNx薄膜。利用X射线能谱仪(EDX)、X射线衍射(XRD)、紫外/可见分光光度计、四探针电阻率测试仪等分析薄膜的组分、结构和特性。结果表明:薄膜中原子比N /Ti接近于1;衬底温度对薄膜的择优取向影响显著,240℃附近是TiNx薄膜结晶择优取向由(111)向(200)转变的临界点;薄膜的反射率在近红外波段平均反射率随衬底温度升高,先增大后减小,薄膜的电阻率随着衬底温度的升高而显著降低。

    Abstract:

    TiNx thin films were deposited on p-Si(111) substrate by DC magnetron reactive sputtering method . The composition, structure and photoelectric properties of the films were studied by using energy dispersive x-ray spectroscopy (EDX), x-ray diffraction (XRD), UV-visible spectrophotometer, and four-probe resistivity meter. The results show that the atomic ratio N/Ti of the prepared TiNx thin films is close to 1. The preferred orientation of TiNx thin films is obviously influenced by the substrate temperature, and there is a transition of the preferred orientation from (111) to (200) when the substrate temperature is about 240℃. The average reflectivity of films in the near infrared band first increase and then decrease with the increase of substrate temperature, while the resistivity of TiNx thin films decrease rapidly.

    参考文献
    相似文献
    引证文献
引用本文

李海翼,赖珍荃,朱秀榕,胡敏. DC磁控溅射制备的TiNx薄膜组分及性能分析[J].红外与毫米波学报,2010,29(4):245~247]. LI Hai-Yi, LAI Zhen-Quan, ZHU Xiu-Rong, HU Min. Composition and properties of TiNx thin films prepared by DC magnetron sputtering[J]. J. Infrared Millim. Waves,2010,29(4):245~247.]

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-05-07
  • 最后修改日期:2010-01-31
  • 录用日期:2009-08-10
  • 在线发布日期: 2010-08-25
  • 出版日期:
文章二维码