用溶液法制备钙钛矿纳米线光电探测器 |
投稿时间:2017-08-01 修订日期:2017-08-23 点此下载全文 |
引用本文:李宏策,李文芳.用溶液法制备钙钛矿纳米线光电探测器[J].红外,2017,38(11):20~26 |
摘要点击次数: 746 |
全文下载次数: 853 |
|
|
中文摘要:作为一种优秀的光吸收半导体材料,有
机-无机杂化钙钛矿被广泛应用于光电领域。为了制备高
性能光电探测器件,采用溶液法制备了高度有序、超长的CH3NH3PbI3
纳米线,并将其应用于Au/CH3NH3PbI3/Au平面型光电探测器。该
器件具有宽的工作波段,在紫外-可见光-近红外(365~808 nm)
光谱范围内均有响应。其最大光响应度达到3.81 A·W-1,比探
测率为3.7×1011 Jones,开关比为4.9×103,光响应时间约
为7 ms。由于具有优异的光探测能力,该器件拥有广阔的应用前景。 |
中文关键词:溶液法 钙钛矿 纳米线 光电探测器 光响应度 |
|
Fabrication of Perovskite Nanowire Photodetectors by Solution Process |
|
|
Abstract:As an excellent light absorption
semiconductor material, organic-inorganic hybrid halide
perovskite has been widely used in the field of optoelectronics.
To fabricate high performance photoelectric detection devices,
a highly ordered ultra-long CH3NH3PbI3 nanowire is
prepared by solution process and is used to fabricate an Au/CH3NH3PbI3/Au
planar photoelectric detector. The device has a wide operation
waveband. It has light response in the spectral range from
ultraviolet to near-infrared (365-808 nm). Its maximum
light responsibility (R), detectivity (D*), Ilight-Idark
ratio and light response time are up to 3.81 A·W-1,
3.7×1011 Jones, 4.9×103 and 7 ms respectively.
Because of excellent light detection ability, the device has a
wide application prospect. |
keywords:solution process perovskite nanowire photodetector responsivity |
查看全文 HTML> 查看/发表评论 下载PDF阅读器 |