利用二次阳极氧化方法降低N型碲镉汞材料表面复合速度
作者:
作者单位:

上海技术物理研究所

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(面上项目,重点项目,重大项目)


Reducing the surface recombination velocity of N-HgCdTe by second anodization
Author:
Affiliation:

Shanghai Institute of Technical Physics of The Chinese Academy of Sciences

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用微波反射光电导衰退法比较了采用一次阳极氧化和二次阳极氧化的N型碲镉汞材料的非平衡载流子寿命及其随温度的变化,通过与理论值进行比较拟合得到了碲镉汞材料表面复合速度随温度的变化曲线.结果发现,二次阳极氧化方法能够更好地降低材料表面悬挂键的密度,同时减少抛光引入的表面缺陷能级的数量,从而降低材料的表面复合速度,改善材料的非平衡载流子寿命,利于制造出高性能的HgCdTe红外探测器.

    Abstract:

    The lifetime of minority carrier as a function of temperature in n-HgCdTe treated by first anodization and second anodization was measured byμ-PCD and compared. The surface recombination velocity as a function of temperature was simulated from the calculated minority carrier lifetime and measured minority carrier lifetime. The results show that second anodization is an effective way to decrease the density of surface dangling bond and surface defect level, thus reduce the surface recombination velocity and increase the minority carrier lifetime which is beneficial to produce HgCdTe detector with high performance.

    参考文献
    相似文献
    引证文献
引用本文

张立瑶,乔辉,李向阳.利用二次阳极氧化方法降低N型碲镉汞材料表面复合速度[J].红外与毫米波学报,2014,33(4):391~394]. ZHANG Li-Yao, QIAO Hui, LI Xiang-Yang. Reducing the surface recombination velocity of N-HgCdTe by second anodization[J]. J. Infrared Millim. Waves,2014,33(4):391~394.]

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2013-03-19
  • 最后修改日期:2014-05-27
  • 录用日期:2013-05-31
  • 在线发布日期: 2014-09-02
  • 出版日期: