低温磁控溅射制备CdS薄膜的结构和光学特性
DOI:
作者:
作者单位:

上海电力学院 数理学院,上海大学 材料系,绍兴纹理学院 物理系

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(面上项目,重点项目,重大项目)


Structural and optical properties of CdS thin films prepared by RF sputtering
Author:
Affiliation:

Shanghai University of Electric Power,Shanghai University,Shaoxing University

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用磁控溅射的方法在透明导电氧化物衬底上制备了CdS薄膜, 制备时的衬底温度为30~200℃.X射线衍射测试结果表明在这一条件下制备的CdS薄膜是六角纤锌矿的多晶结构.扫描电子显微镜结果显示薄膜具有较好的晶体质量, 这一结论也和拉曼光谱、紫外-可见吸收光谱、光致发光光谱的结果一致.拉曼光谱显示CdS薄膜内部的压应力随着制备温度的提高而增大.

    Abstract:

    Cadmium sulfide thin films were grown on transparent conductive oxide coated glass substrates by radio frequency magnetron sputtering with a substrate temperature ranging from 30℃ to 200℃. X-ray diffraction measurements reveal that cadmium sulfide films were polycrystalline with the hexagonal wurtzite structure. The scanning electron microscope images show a good crystalline quality of the films which can also be confirmed by the Raman spectra, ultraviolet-visible absorption spectra and the photoluminescence spectroscopy. The Raman spectra measurements indicate that the compressive stress in the CdS films increases with increasing growth temperature.

    参考文献
    相似文献
    引证文献
引用本文

朱燕艳,徐闰,方泽波.低温磁控溅射制备CdS薄膜的结构和光学特性[J].红外与毫米波学报,2014,33(1):40~44]. ZHU Yan-Yan, XU Run, FANG Ze-Bo. Structural and optical properties of CdS thin films prepared by RF sputtering[J]. J. Infrared Millim. Waves,2014,33(1):40~44.]

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2012-12-05
  • 最后修改日期:2013-01-26
  • 录用日期:2013-01-29
  • 在线发布日期: 2014-04-03
  • 出版日期: