碲锌镉衬底表面在碲镉汞液相外延工艺中的热腐蚀效应
投稿时间:2017-07-23  修订日期:2017-08-25  点此下载全文
引用本文:
摘要点击次数: 50
全文下载次数: 
作者单位E-mail
宋林伟 昆明物理研究所 songlinwei0111@163.com 
吴 军 昆明物理研究所  
孔金丞 昆明物理研究所 kongjincheng@163.com 
李东升 昆明物理研究所  
张 阳 昆明物理研究所  
李 沛 昆明物理研究所  
杨 翔 昆明物理研究所  
万志远 昆明物理研究所  
黄元晋 昆明物理研究所  
木 胜 昆明物理研究所  
中文摘要:该研究以提高液相外延碲镉汞材料的质量为出发点,研究液相外延生长过程中碲锌镉衬底受到高温汞蒸气影响后的变化情况,并利用光学显微镜、白光干涉仪、EDS等分析测试手段对碲锌镉衬底表面进行分析。研究结果表明,液相外延生长过程中,高温汞蒸气对碲锌镉衬底中表面沉淀物尺寸无明显影响,但在衬底表面发现两种类型的腐蚀点,一种是尺寸为25 μm左右的较大腐蚀点,分布均匀;另一种是尺寸为7 μm左右的圆形腐蚀点,分布不均匀。衬底经过液相外延薄膜成核生长前的温度变化过程以及高温Hg蒸气的作用,碲锌镉衬底表面形貌呈鱼鳞状,粗糙度增大了50 %以上。
中文关键词:液相外延  碲锌镉衬底  汞腐蚀  粗糙度
 
Thermal erosion effect to CZT substrate surface during LPE growth of MCT process
Abstract:Influence of Hg vapor to CZT substrate during LPE growth of MCT process were studied, CZT substrates were characterized by combining with Microscope, White-light Interferometer (WLI) and EDS . Results shown that the CZT substrates mainly suffered the Hg vapor during LPE process,Hg vapor had no effect on the precipitations in CZT substrates surface. Two kinds of typical Hg erosion defects were found on CZT substrates after Hg vapor treatment process. One was a kind of large defect had size of 25 μm and distributed uniformly, while the other was smaller size of 7 μm presented nonuniform distribution. Furthermore, fish scale like surface morphology on CZT substrate was found after Hg vapor treatment process during LPE growth of MCT, surface roughness increased more than 50 %.
keywords:liquid phase epitaxy  CdZnTe substrate  mercury erosion  surface roughness
查看全文  查看/发表评论  下载PDF阅读器

版权所有:《红外与毫米波学报》编辑部