HgCdTe器件中pn结结区扩展的表征方法
作者单位:

中科院上海技术物理研究所,中科院上海技术物理研究所


Characterization method of PN junction region expansion in HgCdTe device
Affiliation:

Shanghai Institute of Technical Physics,Chinese Academy of Sciences,Shanghai Institute of Technical Physics,Chinese Academy of Sciences

  • 摘要
  • | |
  • 访问统计
  • | |
  • 相似文献 [20]
  • | | |
  • 文章评论
    摘要:

    报道了液氮温度下激光束诱导电流(LBIC)和I-V测试两种在HgCdTe器件中pn结结区扩展的表征方法.通过LBIC和I-V测试, 发现了p型HgCdTe材料中由B+离子注入成结和干法刻蚀成结对材料造成的损伤使得有效结区范围大于注入和刻蚀面积, 并获得n区横向扩展.同时, 通过对比, 相互印证两种方法得到的测试结果一致.

    Abstract:

    The laser beam induced current (LBIC) and the I-V test at liquid-nitrogen temperature were applied to characterize the PN junction region extension effect in the HgCdTe device processing. By LBIC and I-V test, it was found that the area of n-type region of p-type HgCdTe material implanted by Boron ion or etched by ion beam milling is larger than the nominal values. The transverse dimension of n-type region was measured. At the same time, it was found that the results obtained by both methods were comparable.

    参考文献
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

翁彬,周松敏,王溪,陈奕宇,李浩,林春. HgCdTe器件中pn结结区扩展的表征方法[J].红外与毫米波学报,2017,36(1):54~59]. WENG Bin, ZHOU Song-Min, WANG Xi, CHEN Yi-Yu, LI Hao, Lin Chun. Characterization method of PN junction region expansion in HgCdTe device[J]. J. Infrared Millim. Waves,2017,36(1):54~59.]

复制
分享
文章指标
  • 点击次数:1907
  • 下载次数: 3110
  • HTML阅读次数: 173
  • 引用次数: 0
历史
  • 收稿日期:2015-12-22
  • 最后修改日期:2016-02-19
  • 录用日期:2016-02-23
  • 在线发布日期: 2017-03-28
文章二维码