25 W solid state power combining amplifier in Ka-band
Author:
Affiliation:
Fund Project:
摘要
|
图/表
|
访问统计
|
参考文献
|
相似文献
|
引证文献
|
资源附件
|
文章评论
摘要:
介绍了一种新型的毫米波波导空间固态高功率合成放大器.该放大器中采用的波导-微带空间功率合成网络,在毫米波频段实现了幅度、相位对称的四路功率分配/合成和波导-微带过渡转换,由此研制的毫米波高功率合成放大器,在29~31 GHz范围内,合成效率高于80%,输出功率大于43.4 dBm,并在30~30.6 GHz内高于25 W.
Abstract:
This paper presents a new waveguide-based spatial power combining amplifier at millimeter-wave frequency. In this amplifier, a waveguide-microstrip spatial power dividing/combining network is adopted. A four-way broadband low loss symmetrical power dividing/combining is achieved at millimeter-wave frequency with an easy manufacture processing and convenience of integrating solid-state high power devices. The measured output power of this amplifier is more than 43.4 dBm in 29~31 GHz, and the corresponding power combining efficiency is more than 80%. The obtained output power is more than 25 W in 30~30.6 GHz.
参考文献
相似文献
引证文献
引用本文
谢小强,刘晓,徐锐敏. Ka波段25 W固态功率合成放大器[J].红外与毫米波学报,2011,30(4):347~349]. XIE Xiao-Qiang, LIU Xiao, XU Rui-Min.25 W solid state power combining amplifier in Ka-band[J]. J. Infrared Millim. Waves,2011,30(4):347~349.]