首页 | 杂志简介 | 征稿简则 | 投稿指南 | 常见问题 | 名词解释 | 刊物订阅 | 联系我们 | English
一种冰醋酸红外气体传感器设计
投稿时间:2016-12-20  最后修改时间:2017-01-06  点此下载全文
引用本文:刘延祥,李铁.一种冰醋酸红外气体传感器设计[J].红外,2017,38(4):17~22
摘要点击次数: 53
全文下载次数: 72
作者单位E-mail
刘延祥 中国科学院上海微系统与信息技术研究所 liuyanxiang@mail.sim.ac.cn 
李铁 中国科学院上海微系统与信息技术研究所  
中文摘要:提出了一种基于非色散红外原 理的冰醋酸红外气体传感器。介绍了冰醋酸红外气体传 感器的原理,然后对其结构设计进行了详细描述,并利用Light Tools 软件对其光路进行了仿真验证,最后获得了冰醋酸红外 气体传感器样机。测试结果表明,该传感器在0~5000 ppm范围内 的测量精度优于±1%F.S.,响应时间(T90)为29 s。这种传感器的光源部分 采用电调制方式,舍弃了传统的红外气体传感器光源部分的机 械斩波结构,进而减小了传感器的体积,提高了稳定性。因此,该传感器 在冰醋酸运输、储存和使用等领域具有广泛的应用前景。
中文关键词:冰醋酸  红外  气体传感器
 
Design of a Glacial Acetic Acid Infrared Gas Sensor
Abstract:A glacial acetic acid infrared gas sensor based on nondispersive infrared principle is proposed. The principle of the glacial acetic acid infrared gas sensor is presented. Then, the structure design of the sensor is described in detail. The optical path of the sensor is simulated by using the LightTools simulation software. Finally, the prototype of the glacial acetic acid infrared gas sensor is obtained. The test results show that the measurement accuracy of the sensor is better than ±1% F.S. in the range from 0 to 5000 ppm. Its response time (T90) is 29 s. In the light source of the sensor, electric modulation is used and the mechanical chopper structure in the light source of the traditional infrared gas sensor is removed. Thus, the volume of the sensor is reduced and its stability is improved. So, this sensor has a wide application prospect in the fields of acetic acid transportation, storage and use etc.
keywords:glacial acetic acid  infrared  gas sensor
查看全文  查看/发表评论  下载PDF阅读器

版权所有:《红外》编辑部

北京勤云科技发展有限公司