基于多路红外视频拼接的显示器硬件电路实现
DOI:
CSTR:
作者:
作者单位:

华北光电技术研究所

作者简介:

通讯作者:

中图分类号:

基金项目:


Hardware circuit design of display with multi-channel video splicing
Author:
Affiliation:

North China Research Institute of Electric-optics

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    显示器是信息装备的重要器件,在显示器上实现多路视频的拼接不仅能够进行大视角监控和取景,而且可以解决单个摄像机视频中存在目标遮挡、多视角显示凌乱等难题。本文设计了一款基于FPGA具有多路红外视频拼接的显示器,该显示器的设计选用复旦微JFM7K325T大资源的FPGA作为处理器,配备以2片紫光国芯的16Bit SDRAM高速存储芯片作为图像的缓存模块,支持SDI以及HDMI红外数字视频输入接口,提供3路FPD-LINK高速红外数字视频接口,分别将3个分辨率为1280*1024的红外视频图像经FPGA处理成3个640*720分辨率的图像来铺满1920*720分辨率的显示器,能实时显示不同场景的红外图像,完成多路红外视频拼接。

    Abstract:

    The display is an important device of information equipment. The splicing of multiple videos on the display can not only monitor and view from a large perspective, but also solve the problems of target occlusion and multi view display disorder in a single camera video. This paper is designed a display with multi-channel video splicing based on FPGA. The design of the display selects the FPGA of Fudan Micro JFM7K325T large resources as the processor, and is equipped with two Unilc’s 16Bit SDRAM high-speed memory chips as the image caching module. It supports SDI and HDMI digital video input interfaces, and provides 4-channels FPD-LINK high-speed digital video interfaces, three infrared video images with a resolution of 1280 * 1024 are processed into three 640 * 720 resolution images by FPGA through three channels of this video interface to fill the 1920 * 720 resolution display screen, and the images are displayed in real time, finally achieving the purpose of video splicing.

    参考文献
    相似文献
    引证文献
引用本文
相关视频

分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2024-06-06
  • 最后修改日期:2024-07-08
  • 录用日期:2024-07-17
  • 在线发布日期:
  • 出版日期:
文章二维码